WD-40 EZ-REACH™

This upgrade to a classic DIY product makes a big divergence.

Sponsored by WD-xl EZ-REACH_™

I've used the original WD-40 production for decades every bit a multi-use lubricant effectually the house and garage. Information technology works slap-up to tranquillity squeaking door hinges and rollers on sliding doors, and to loosen up rusted nuts and bolts. Only the biggest consequence with the original product was keeping tabs on the red harbinger-it seemed to disappear at the worst possible moment. WD-40 solved that trouble with its Smart Straw product: The harbinger is permanently attached to the actuator assembly so you never have to search for information technology. Now, WD-40 has taken a huge leap forward with its WD-xl EZ-REACH_™ production. The new container has both a wide spray nozzle and an 8-in. flexible straw that bends into any shape and keeps that shape so you can deliver WD-40 into tight, hard-to-reach spots.

I put the WD-forty EZ-Attain_™ product to the test effectually my firm and garage. First, I used it to lubricate the door latch linkage cached deep inside the door console on my minivan. I bent the straw so it would fit around the metal cutouts and pressed the trigger. The flexible straw delivered the WD-xl lubricant exactly where I needed it.

I started at the lesser track rollers to get the hang of it. The bottom roller is tucked upwards inside the track, and there's a plastic chain link wiring harness in the mode. I threaded the flexible nozzle nether the wiring harness and and then bent the tip up and toward the roller. Then I gave it a few quick shots. It worked exactly as I'd hoped. Then I lubed the upper track roller. Aforementioned affair-lubed exactly where I needed it without overspray. Both doors now slide freely and I didn't have whatsoever cleanup piece of work later.

While I was at it, I lubricated the pivots on the rear hatch hydraulic struts. Next, I lubricated the throttle cable on my pressure washer. The bendable straw allowed me to reach the throttle cable without having to remove the air cleaner assembly-which saved a lot of time and hassle. Before leaving the garage, I bent the flexible straw in an arc and lubricated the torsion springs on my garage door. Then I shot every roller and hinge to keep them running smoothly.

Back inside the house (and on a roll!), I used the WD-40 EZ-REACH_™ lubricant on the showerhead'south flexible joint and to free up the bathtub bleed linkage. I've been putting off a plumbing-valve rebuild because I was worried it was going to be a bear to disassemble. Then I used the WD-40 EZ-REACH_™ straw to use lubricant to the stem and packing nut and the handle retaining screw. After the assembly soaked for a while, the valve came apart with no problem.

Based on what I've seen so far, the WD-twoscore EZ-Accomplish_™ product does everything the previous WD-40 products did. But at present you get the added convenience of a straw that will never get lost, and will flex into any position and deliver the lube exactly where you need it. In my book, it's a winner.

— Rick Muscoplat, Contributing Editor

This is a sponsored conversation written past me on behalf of WD-40. The opinions and text are all mine.

bensoncany2001.blogspot.com

Source: https://www.familyhandyman.com/article/wd-40-ez-reach-can-handle-any-job/

Share this post